Attention! This type of firmware is suitable for all types of phones iPhone 2G and for 3G phones officially purchased in Russia. That is, 2G – all 3G – officially purchased in Russia. For those who do not have official 3G phones, do not update to the official firmware yet .. The whole process takes about half an hour, if everything is done carefully, then there should be no problems. Jailbreak adds Cydia. Installer is no longer supported by developers.
1. Update iTunes to the latest version. (download from the site Apple) 2. Download and unpack the redsn0w program 3. Download and unpack bootloaders 3.9 and 4.6 (for iPhone 3G models you do not need) 4. Download firmware 3.0. For iPhone 2G iPhone 1,1_3.0_7A341_Restore.ipsw For iPhone 3G iPhone 1,2_3.0_7A341_Restore.ipsw
1) Open iTunes and connect iPhone to your computer. 2) Press SHIFT + on your keyboard and the “Restore” button in iTunes. A dialog box will open, select the downloaded original firmware 3.0 file. You can just click the “Restore” button, in this case iTunes will download the latest firmware itself. The flashing process will start iPhone. What will be on the phone screen is shown in the photos. As you can see, the procedure takes 10-15 minutes and if the firmware file was downloaded correctly, it does not cause problems. When finished, close iTunes. After installing the firmware, we are waiting for activation (a network will appear), for 3G, then iTunes will offer to set up the phone as a new one, or from a backup copy, you must select it as a new one. For 2G, after installing the firmware, close iTunes and proceed to jailbreak. 3) Run redsn0w.exe from the folder where you unpacked redsn0w. Click Browse .. and select the downloaded original firmware, as is the case with iTunes. 4) In the window that appears, select the items 'Add Cydia', and 'Unlock phone' for 2G. For iPhone 3G, the 'Unlock phone' item does not need to be checked. Click next. 5) In the 'Bootloaders' window, specify the path to the downloaded bootloaders 3.9 and 4.6. For iPhone 3G, skip this step. Click next. 7) Now you need to switch iPhone to DFU mode. Watch the activity of the lines in the program window and do what is written: 1 line – the program translates the body in 'Recovery Mode' (lace and disk on the screen iPhone) 2 line – Press and hold the round 'Home' button on the front phone panel. 3rd line – Continuing to hold down the 'Home' button, press and hold the “Power” button – at the top at the end. (Keep 2 buttons pressed for -10 seconds) Line 4 – Hold only the 'Home' button, release “Power”. The screen turns white. 5 line – jailbreak starts. Let go of everything. If it didn't work the first time, do not despair, the program will prompt you to do it again. 6) After detecting iPhone in DFU mode, the program will start the jailbreak process. After successful completion of the process, wait for the download iPhone.
If you want to install programs via .ipa files, you need to go to Cydia and add the repository http://cydia.hackulo.us. Then go to the program installation section and install the patch for firmware 3.0 and Installous in the Hackulo.us folder that appears.